Damp Proofing Injection Cream – Dampcure 1000
Damp-Cure rising damp cream is supplied in a low-cost 380ml tube. Inject a new chemical damp proof course along the base of the wall to stop rising damp.
The cream is injected directly into 12mm holes drilled in a mortar bed at regular intervals, preferably at perp-end joints, for an effective damp course treatment. Damp-Cure cream is formulated without thickening agents, using an emulsification process to deliver a 100% active damp proof cream at trade prices.
Solid walls can be drilled and injected from the most convenient side. The inner and outer skins of a cavity wall should be treated independently of each other, drilling and injecting the both sides of the wall to form a chemical DPC in each. Renew damp plaster to complete the damp proofing treatment.
Damp-Cure 380 is packed in a standard 380ml cartridge
Consumption rate – 115mm wall* 3.8m / tube of DIY DPC cream
Consumption rate – 230mm wall* 1.9m / tube of damp proofing cream
*Approximation only – allows 5-10% wastage
No specialist equipment is required. To install the damp course cream you will need a 12mm drill bit and a heavy duty caulking gun.
FREE – One extension injection nozzle is included with each order for damp proofing cream.